Abstract :
Hybrid composite is a composite of organic and inorganic element which consists of nano particles to enhance the strength as compared to conventional composites. A model has been proposed to determine the elastic properties of hybrid composite. The hybrid composite consists of conventional fiber like carbon fiber and nanocomposite carbon nano tube and polymer as matrix. The first step here is to determine the properties of nanocomposite which is done by using Mori Tanaka method with rule of mixture. The CNTs are considered as cylindrical inclusions in polymer matrix in MoriTanaka method. Assuming perfect bonding between carbon fibers and nano composite matrix, the effective properties of the hybrid composite has been evaluated using mechanics of materials approach. A vibration analysis of simply supported shell element of A 8 layered laminate with stacking sequence 0 45 45 90 S has been used 8 noded shell element has been used for the finite element analysis having 5 degrees of freedom each node u , v, w, x, y . A finite element mesh, the shell coordinates which are in Cartesian form are converted into parametric form using two parameters a1, a2 These parameters are again mapped into isoparametric form , . For vibration analysis of simply supported shell element. The dynamic equations of shell are derived using Hamiltons principle. As the damping characters of the dynamic system are not available, for further investigation damping ratio of first mode and last active mode are assumed. Using Rayleigh damping the damping ratios of intermediate modes can be calculated. The time decay of the system from maximum amplitude to 5 of the maximum amplitude has been used as a parameter to study various shell structures by varying the volume fraction of CNTs in nanocomposite and by varying carbon fiber volume fraction. Yogendra Singh Thakre | Prof. Amit Kaimkuriya "Analysis of CNT Based Hybrid Composite Plate Using Material of Mechanics Approach and Fem" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-6 , October 2018, URL: https://www.ijtsrd.com/papers/ijtsrd18857.pdf Paper URL: http://www.ijtsrd.com/engineering/mechanical-engineering/18857/analysis-of-cnt-based-hybrid-composite-plate-using-material-of-mechanics-approach-and-fem/yogendra-singh-thakre
Keyword :
CNT's, Nano-composite, Carbon fiber, Epoxy, Elastic Property, Damping ratio, Frequency, Impulse Response.